The graceful Dino Buddies are present in the decoration of the baby's room in the 3m Dinosaur Footprint Wallpaper. Because it is self-adhesive, it does not need glue preparation for application, which makes it much more practical! The glue and ink used for printing are water-based and polymers, with no toxic agents or strong odors. In this way, the material is of high quality, environmentally friendly and totally safe for children's environments. It can be applied to any smooth and clean surface, without dust residues, such as: walls, doors, furniture and glass. To find the ideal amount of paper, just divide the width of the wall by 53cm.
Method of application:
Remove the beginning of the protective film and paste the tip of the paper at the desired height, so that it is aligned with the wall. Gradually, remove the film and pass a soft cloth over the paper to fix it. In doing so, the possibility of air bubbles forming is minimal. When you get to the footer, cut out the wallpaper. Align the design of the print, overlapping about 2mm over the paper already applied and repeat the procedure described above, cutting off the upper excess. Do this until the entire desired area is covered by the paper. After full application, wipe the surface with a dry cloth, applying moderate force, to ensure that it is firmly attached to the surface.
ATTENTION: * Do not apply on surfaces with texture, dirt or infiltration, as the fixation will be impaired.
** Attention! Illustrative picture. The color tone may vary.